Electrical setup | ||||
001 | 3x 400 V | S | ||
004 | 50 Hz | S | ||
11 | 15.0 HP (11.0 kW) sanding motor with sanding module | S | ||
12 | 20.0 HP (15.0 kW) sanding motor with sanding module | O | ||
13 | 25.0 HP (18.5 kW) sanding motor with sanding module | O | ||
10 | STAR-delta-START | S | ||
Ampage meter for monitoring the electrical load on the units | S | |||
Automatic sanding-belt brake | S | |||
Sanding unit and sanding cushion | ||||
Combination unit CU (contact roller and sanding cushion), hardness of the contact roller C 85° Shore | S | |||
Easily and quickly exchangable stiff sanding pad | S | |||
300 | Electro-pneumatic sanding cushion EP | O | ||
400 | Segmented, electro-pneumatic sanding pad ESC, touchscreen included | O | ||
Sanding width 1100 mm | S | |||
Sanding height 3–170 mm | S | |||
Sanding belt is oscillated electro-pneumatically | S | |||
Electronic run-off protection for the sanding belt | S | |||
Pneumatic tensioning of the sanding belt | S | |||
Sanding belt 1110 x 1900 mm (width x length) | S | |||
19 | Activation and deactivation of the first sanding module from the control panel | O | ||
21 | Variable cutting speed control from 2.4–19 m/sec (available for 15.0 HP (11.0 kW) motors) | O | ||
22 | Variable cutting speed control from 2.4–19 m/sec (available for 20.0 HP (15.0 kW) motors) | O | ||
23 | Pressurised air cleaning module with timer | O | ||
25 | Brush unit at outfeed end, Ø 150 mm, incl. brush (!26) | O | ||
26 | Brush unit “Scotch Brite” at outfeed end, Ø 150 mm, incl. brush | O | ||
29 | Special wood structuring group, Ø 150 mm, motor power 4.2 kW, incl. brush K60 | O | ||
Feeder table | ||||
Electronic height control for the table | S | |||
Digital display shows the height of the feeder table | S | |||
16 | Variable feed speed 3.7–16 m/min, adjusted using the handwheel | S | ||
17 | Inverter controlled variable feed speed of 2.8-20 m/min, selected from the control panel | O | ||
Mechanical vibration-absorbing rubber pressure rolls | S | |||
Hand guard and over-thicknessing protection for the workpiece | S | |||
18 | Workpiece thickness sensor | O | ||
27 | Vacuum table for FW 1100 with 4.0 HP (3.0 kW) fan | O | ||
32 | Vacuum table for connection to workshop dust extraction, without fan | O | ||
General | ||||
Machine packing dimensions in mm (length x width) | 1480 x 1550 x 2150 | |||
Extraction connector Ø in mm | 1x 160 | |||
Weight kg (with standard configuration) | 1200 | |||
Important Accessories | ||||
85 | 300 mm table extension with roller, can be used on both sides of the sanding table | O | ||
Transport | ||||
221 | Preparation for container | O | ||