| G 320 | ||||
| Electrical setup | ||||
| 001 | 3x 400 V | S | ||
| 002 | 3x 230 V motor voltage | O | ||
| 003 | 1x 230 V motor voltage | O | ||
| 004 | 50 Hz | S | ||
| 005 | 60 Hz | O | ||
| Working dimensions | ||||
| Edge thickness min.–max. (mm) | 0,4–2,0 | |||
| Work piece thickness min.–max. (mm) | 10-45 | |||
| Min. workpiece width (mm) *The minimal workpiece width varies depending on the workpiece length, height and type of surface | 70 | |||
| Min. workpiece length (mm) | 210 | |||
| Units | ||||
| Coiled edge band feed support plate | S | |||
| Edge feeding is automatic for roller materials with a thickness of 0.4–2 mm, strip glue in separate feed | S | |||
| Guillotine shears for cutting coiled edge bands up to 2 mm in thickness in Hard-PVC/ABS | S | |||
| Glue unit for glue granulate from the teflon coated glue pot (~ 250lfm per 1kg granules on a 19mm plate) | S | |||
| Spring loaded pressure unit with 1 pressure roller and 1 free moving roller | S | |||
| Guillotine cutting unit with cutting knives for end cuts | S | |||
| Multifunction milling aggregate, 12,000 rpm, 0.22 kW Flush trimming, radius trimming and bevel trimming | S | |||
| Tooling for 2 mm radius | S | |||
| 10 | Radius scraping unit for R= 2 mm, mechanically controlled (!20/30) | O | ||
| 20 | Glue scraping unit, mechanically controlled (!10/30) | O | ||
| 30 | Buffing unit with 2 motors at 1400 rpm and 900 W (!10/20) | O | ||
| 32 | Cleaning agent sparaying unit for polishing unit (#30) | O | ||
| 50 | Heated entry ruler | O | ||
| Operation | ||||
| Operating panel with LCD display and keypad | S | |||
| Through feed | ||||
| Workpiece chain feeder | S | |||
| 8 m/min feed speed (~ 300lfm/h) | S | |||
| Extensible workpiece support | S | |||
| 60 | Edge band feed support plate D=800 mm instead of D=600 mm | O | ||
| General | ||||
| Extraction connector Ø in mm | 120 | |||
| Weight kg (with standard configuration) | 350 | |||
| Length in mm | 2000 | |||
| Important Accessories | ||||
| 210 | Rolling carriage | O | ||
| Transport | ||||
| 221 | Preparation for container Edgebander | O | ||
