| G 480 | ||||
| Electrical setup | ||||
| 001 | 3x 400 V | S | ||
| 002 | 3x 230 V motor voltage | O | ||
| 004 | 50 Hz | S | ||
| 005 | 60 Hz | O | ||
| Premilling Unit | ||||
| Premilling unit centrally controlled – can be disengaged | S | |||
| Adjustable cutting depth (mm) | 0–2 | |||
| Tool diameter (mm) | 80 | |||
| Max. processing height (mm) | 45 | |||
| No. of asymmetrical diamond tipped V-cut milling units | 2+2 | |||
| Rpm | 12.000 | |||
| Power (kW) of each motor | 2x 1,1 | |||
| Working dimensions | ||||
| Edge thickness min.–max. (mm) | 0,4–3,0 | |||
| Work piece thickness min.–max. (mm) | 8–45 | |||
| Min. workpiece width (mm) *The minimal workpiece width varies depending on the workpiece length, height and type of surface | 70 | |||
| Min. workpiece length (mm) | 210 | |||
| Units | ||||
| Coiled edge band feed support plate Ø 800 mm, for PVC/ABS | S | |||
| Edge feeding is automatic for roller materials with a thickness of 0.4–3 mm, strip glue in separate feed | S | |||
| Guillotine shears for cutting coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS | S | |||
| Glue unit for glue granulate from the teflon coated glue pot (~ 250lfm per 1kg granules on a 19mm plate) | S | |||
| Spring loaded pressure unit with 1 pressure roller and 1 free moving roller | S | |||
| 12,000 rpm, 0.27 kW end trimming unit, with Ø 100 mm 24 tooth HW-Saw blades | S | |||
| 70 | Cross-cut saw unit, 12,000 rpm, 0.27 kW, HW saw blades Z 24, Ø 100 mm, 45° working angle; cutter capping 0°/20° manual | O | ||
| Multifunction milling aggregate, 12,000 rpm, 0.37 kW Flush trimming, radius trimming and bevel trimming | S | |||
| Corner processing unit for soft and post-forming workpieces for processing front edges (edge thickness min.–max. 0.4–3.0 mm, max. workpiece height 30 mm, min., workpiece length 270 mm) | S | |||
| Tooling for 2 mm radius | S | |||
| 40 | Tooling for 3 mm radius | W | ||
| 43 | Reduced price for G 480 without corner rounding unit (!44) | O | ||
| 44 | Reduced price for G 480 without premilling unit (!43) | O | ||
| 10 | Radius scraping unit for R= 2 mm, mechanically controlled | O | ||
| 20 | Glue scraping unit, mechanically controlled (!30) | O | ||
| 30 | Buffing unit with 2 motors at 1400 rpm and 900 W (!20) | O | ||
| 32 | Cleaning agent sparaying unit for polishing unit (#30) | O | ||
| 42 | Release agent spraying unit, machine infeed side (!44) | O | ||
| 45 | Infrared heat lamp for pre-heating board edges | O | ||
| Operation | ||||
| Operating panel with LCD display and keypad | S | |||
| Through feed | ||||
| Workpiece chain feeder | S | |||
| 9 m/min feed speed (~ 340lfm/h) | S | |||
| Extensible workpiece support | S | |||
| General | ||||
| Extraction connector Ø in mm | 7x60 | |||
| Weight kg (with standard configuration) | 700 | |||
| Length in mm | 3350 | |||
| Important Accessories | ||||
| 500 | 02.0.200 - distributor for extraction G480 | O | ||
| 501 | 02.0.406 - H/SE-Industrial Dust reinforced D=60mm /m | O | ||
| Transport | ||||
| 221 | Preparation for container Edgebander | O | ||
