| Electrics |
| 001 |
3x 400 V motor voltage, 50 Hz motor frequency |
S |
| 002 |
3x 230 V motor voltage, 60 Hz motor frequency |
O |
| 29 |
Electrical equipment according to CSA rules |
O |
| 77 |
Tempora air conditioning unit (for continuous external conditions of over 40° C) |
O |
| |
| Working dimensions |
| |
Min. workpiece width (mm) *The minimum workpiece width varies depending on the workpiece length, height and type of surface |
70 |
| |
Min. workpiece length (mm) |
140 |
| |
Min. workpiece height (mm) |
8 |
| |
Max. workpiece height (mm) |
60 |
| |
Processing of 0.4–3.0 mm coiled material |
S |
| |
Processing of 0.4–8 mm strip material |
S |
| |
| Units |
| 75 |
"X-motion plus" control with 10.4” Touch Screen display and e-motion multi-function trimmers as well as integrated maintenance software and network connection also available |
S |
| 76 |
Fan for electric box |
O |
| 72 |
Recording of operating hours for several users |
O |
| |
Solid steel machine chassis |
S |
| 62 |
Pull-out workpiece support 850 mm – to assist in the processing of larger workpieces |
S |
| |
Manual height adjustment of the workpiece feed pressure rollers with 2 offset lines of rollers for equal pressure distribution on the workpiece |
S |
| |
Chain feeder with a speed of 12 m/min and rubber grip pads, for maximum grip on the workpiece |
S |
| 64 |
Pneumatic-mechanical infeed gate, to prevent the premature feeding of the workpiece |
O |
| |
770 mm diameter workpiece support roller, running on ball bearings |
S |
| |
Feeding guide with rollers for processing fragile material |
S |
| 46 |
Extended infeed (+ 400 mm) |
O |
| |
Premilling unit with two 1.5 kW independant motors running at 12,000 rpm and diamond tipped cutters, depth of cut manually adjustable between 0–3 mm, 2 diamond tipped cutters included (Ø= 80 mm, H= 49 mm, Z 2+2) |
S |
| 44 |
Reduced price for tempora 60.08 without premilling unit |
O |
| 45 |
Premilling, 64 mm instead of 49 mm (!44) |
O |
| 47 |
Premillers with replaceable cutters 64 mm in height instead of 49 mm (!44/!45) |
O |
| 43 |
Infrared heat lamp for pre-heating board edges |
O |
| |
Edge feed for coiled and strip material 0.4–8 mm thick, with edge thickness recognition via an infra-red sensor |
S |
| |
Guillotine trimming unit for the precutting of PVC/ABS edgeband material 0.4–3.0 mm thick |
S |
| |
Teflon coated gluepot with 1.5 kg capacity, glue applied using a fine-adjustable glue roller and quick change system as well as monitoring of the heating cartridge |
S |
| 65 |
Preparation for retrofitting a premelter (!66) |
O |
| 66 |
Premelter for glue granulate, 3.5 kg capacity; 0.4 kg glue pot with glue level sensor and quick change system, heated glue rollers (!65) |
O |
| 67 |
Reverse function of the glue application roller |
O |
| 73 |
Pneumatically feed-controlled glue unit |
S |
| |
Manually controlled pressure unit with 1 large motor driven roller and 2 conical rollers operating pneumatically |
S |
| |
End trimming unit with 2 independant motors, each with 0.37 kW and 12,000 rpm, both manually tiltable between 0°–15° |
S |
| 70 |
End trimming unit "e-motion" with 2 independant motors, each with 0.37 kW and 12,000 rpm, both pneumatically tiltable between 0°–15° |
O |
| |
Multi functional trimming unit "e-motion" for radius and flush trimming and bevel trimming of thin edges with 2 independant motors, each with 0.75 kW and 12,000 rpm, motor driven positioning of the edge thickness adjustment and pneumatic disengage function via the control panel |
S |
| 51 |
Multi-functional trimming unit with vertical reference rollers for the processing of workpieces with hinge bores |
O |
| 69 |
Corner rounding unit for soft- and post forming pieces for processing edges of between 0.4 and 3.0 mm in thickness and 10–45 mm in height |
O |
| 71 |
Motor adjustment and positioning of corner-rounding cutters |
O |
| |
| Finishing units |
| 10 |
Radius scraping unit, pneumatic engagement/disengagement function, mechanic adjustment |
S |
| 14 |
Single axis, motor powered radius scraping aggregate (manual adjustment of the height) including a pneumatic engagement/disengagement function. |
O |
| 20 |
Glue scraping unit, pneumatically controlled (instead of buffing unit) |
O |
| 21 |
Glue scraping for nesting (instead of buffing unit) (!20) |
O |
| 30 |
Buffing unit with 2 motors |
S |
| 32 |
Spraying unit for cleaning fluids situated before the polishing units (only with buffing unit) |
O |
| 42 |
Spraying unit for separation solution positioned at the front of the machine (PUR-Glue) (only with premilling unit) |
O |
| 53 |
Spraying of lubricants |
O |
| |
| Tailor made equipment options |
| 81 |
Tool preparation R= 1 mm instead of R= 2 mm |
O |
| 83 |
Tool preparation R= 3 mm instead of R= 2 mm |
W |
| 33 |
LED lighting |
O |
| |
| Packages |
| 100 |
Professional Package tempora 60.08 x-motion plus (additional options included: 64, 47, 67, 70, 69, 14, 20, 33) |
O |
| |
- (64) Pneumatic-mechanical infeed gate, to prevent the premature feeding of the workpiece |
|
| |
- (47) Premillers with replaceable cutters 64 mm in height instead of 49 mm |
|
| |
- (67) Reverse function of the glue application roller |
|
| |
- (69) Corner rounding unit for soft- and post forming pieces for processing edges of between 0.4 and 3.0 mm in thickness and 10–45 mm in height |
|
| |
- (70) End trimming unit "e-motion" with 2 independant motors, each with 0.37 kW and 12,000 rpm, both pneumatically tiltable between 0°–15° |
|
| |
- (14) Single axis, motor powered radius scraping aggregate (manual adjustment of the height) including a pneumatic engagement/disengagement function. |
|
| |
- (20) / (21) Glue scraping unit, pneumatically controlled |
|
| |
- (33) LED lighting |
|
| |
| Important Accessories |
| 500 |
02.0.201 - distributor for extraction T60.08 |
O |
| 502 |
02.0.412 - H/SE-Industrial Dust reinforced D=120mm |
O |
| 501 |
02.0.406 - H/SE-Industrial Dust reinforced D=60mm |
O |
| |
200-102 - Filter unit with water separator and two fine upstream filters with contamination indicators for maintenance unit for wall assembly |
O |
| |
200-105 - Additional support frame for edgebanders with a length of 2100 mm. The height is adjustable from 870 to 960 mm |
O |
| |
200-106 - Mobile cleaning unit for the glue pot including a temperature regulator initiator for the glue rollers, including a pre-melting function |
O |
| |
200-107 - Storage bins for the glue pot, including an air condenser for PUR glue |
O |
| |
| Transport |
| 229 |
Container packaging |
O |
| |
| U-motion classic return system |
| |
Return feeding without rotation function for workpieces; length 300-2,800mm; width 50-1,300mm; thickness 8-60mm; workpiece sizes with 4 sided edge application; min 300x300mm; max 1,300x1,300mm; max weight < 700mm length = 30kg; max weight > 700mm length = 60kg; variable feed speed 7-20 m/min; max. 11 cycles/min; conveyor belt for the return transport; the workpieces as well as the outfeed station (2,000x800mm); 3x400 Volt / 50-60Hz; 6Bar; 10Nl/min |
O |
| |
| U-motion professional return system |
| |
Return feeding with rotation function for workpieces and unloading position for Euro pallets; length 300-2,800mm; width 50-1,300mm; thickness 8-60mm; workpiece sizes with 4 sided edge application; min 300x300mm; max 1,300x1,300mm; max weight < 700mm length = 30kg; max weight > 700mm length = 60kg; variable feed speed 7-20 m/min; max. 11 cycles/min; conveyor belt for the return transport; the workpieces as well as the outfeed station (2,000x800mm); 3x400 Volt / 50-60Hz; 6Bar; 450Nl/min |
O |
| |
| U-motion professional return system options |
| |
additional loading position 1,200mm (max. 1 piece) |
O |
| |
