| Electrics | ||
| 001 | 3x 400 V motor voltage, 50 Hz motor frequency | S |
| 002 | 3x 230 V motor voltage, 60 Hz motor frequency | O |
| 29 | Electrical equipment according to CSA rules | O |
| 77 | Tempora air conditioning unit (for continuous external conditions of over 40° C) | O |
| Working dimensions | ||
| Min. workpiece width (mm) *The minimum workpiece width varies depending on the workpiece length, height and type of surface | 70 | |
| Min. workpiece length (mm) | 140 | |
| Min. workpiece height (mm) | 8 | |
| Max. workpiece height (mm) | 60 | |
| Processing of 0.4–3.0 mm coiled material | S | |
| Processing of 0.4–12 mm strip material | S | |
| Units | ||
| "E-motion plus" control with 10.4” Touch Screen display with integrated maintenance software and network connection available | S | |
| 76 | Fan for electric box | O |
| 72 | Recording of operating hours for several users | O |
| Solid steel machine chassis | S | |
| 62 | Pull-out workpiece support – to assist in the processing of larger workpieces | S |
| Motor driven adjustment of the workpiece feed pressure rollers with 2 offset lines of rollers for equal pressure distribution on the workpiece | S | |
| Chain feeder with a speed of 12 m/min and rubber grip pads, for maximum grip on the workpiece | S | |
| 60 | Chain feeder with a speed of 12 and 20 m/min and rubber grip pads for maximum grip on the workpiece | O |
| 64 | Pneumatic-mechanical infeed gate, to prevent the premature feeding of the workpiece | O |
| 770 mm diameter workpiece support roller, running on ball bearings | S | |
| Feeding guide with rollers for processing fragile material | S | |
| 46 | Extended infeed (+ 400 mm) | O |
| 41 | Premilling unit with two 1.5 kW independant motors running at 12,000 rpm and diamond tipped cutters, motor driven positioning of the depth of cut between 0–3 mm, 2 diamond tipped cutters included (Ø= 80 mm, H= 49 mm, Z 2+2) | S |
| 44 | Reduced price for tempora 60.12 without premilling unit | O |
| 45 | Premilling, 64 mm instead of 49 mm (!44) | O |
| 47 | Premillers with replaceable cutters 64 mm in height instead of 49 mm (!44/!45) | O |
| 43 | Infrared heat lamp for pre-heating board edges | O |
| Edge feed for coiled and strip material 0.4–12 mm thick, with edge presence recognition via an infra-red sensor | S | |
| Guillotine trimming unit for the precutting of PVC/ABS edgeband material 0.4–3.0 mm thick | S | |
| Teflon coated gluepot with 1.5 kg capacity, glue applied using a fine-adjustable glue roller and quick change system as well as monitoring of the heating cartridge | S | |
| 65 | Preparation for retrofitting a premelter (!66) | O |
| 66 | Premelter for glue granulate, 3.5 kg capacity; 0.4 kg glue pot with glue level sensor and quick change system, heated glue rollers (!65) | O |
| 67 | Reverse function of the glue application roller | O |
| 73 | Pneumatically feed-controlled glue unit | S |
| Motor driven positioning of the pressure unit with 1 large motor driven roller and 2 conical rollers operating pneumatically | S | |
| 70 | End trimming unit with 2 independant motors, each with 0.50 kW and 12,000 rpm, both pneumatically tiltable between 0°–15° | S |
| Multi functional trimming unit for radius and flush trimming and bevel trimming of thin edges with 2 independant motors, each with 0.75 kW and 12,000 rpm, motor driven positioning of the edge thickness adjustment and pneumatic disengage function via the control panel | S | |
| 51 | Multi-functional trimming unit with vertical reference rollers for the processing of workpieces with hinge bores | O |
| 69 | Corner rounding unit for soft- and post forming pieces for processing edges of between 0.4 and 3.0 mm in thickness and 10–60 mm in height | O |
| 68 | Corner rounding unit with 2 independent motors for soft and postforming workpieces and for the processing of front and rear edges with 0.4-3.0 mm edge thickness and 10-60 mm workpiece height; motorised positioning of the corner rounding unit | O |
| 71 | Motor adjustment and positioning of corner-rounding cutters | O |
| Finishing units | ||
| 11 | 2-axis, motor-driven, position-controlled radius trimming unit incl. pneumatic reverse function | S |
| 20 | Glue scraping unit, pneumatically controlled | O |
| 21 | Glue scraping for nesting (!20) | O |
| 30 | Buffing unit with 2 motors | S |
| 32 | Spraying unit for cleaning fluids situated before the polishing units | O |
| 42 | Spraying unit for separation solution positioned at the front of the machine (PUR-Glue) (!44) | O |
| 52 | Spraying of anti-static agents (!53) | O |
| 53 | Spraying of lubricants (!52) | O |
| 74 | Grooving unit for horizontal or vertical processing, motorised adjustment X+Y axis, limitation on the corner rounding unit 10-45mm workpiece height (#69 / !68) | O |
| Tailor made equipment options | ||
| 81 | Tool preparation R= 1 mm instead of R= 2 mm | O |
| 83 | Tool preparation R= 3 mm instead of R= 2 mm | W |
| 33 | LED lighting | O |
| Packages | ||
| 100 | Professional package tempora 60.12 e-motion (additional options included: 64, 47, 67, 69, 71, 20, 32, 33 ) | O |
| - (64) Pneumatic-mechanical infeed gate, to prevent the premature feeding of the workpiece | ||
| - (47) Premillers with replaceable cutters 64 mm in height instead of 49 mm | ||
| - (67) Reverse function of the glue application roller | ||
| - (69) Corner rounding unit for soft- and post forming pieces for processing edges of between 0.4 and 3.0 mm in thickness and 10–60 mm in height | ||
| - (71) Motor adjustment and positioning of corner-rounding cutters | ||
| - (20) / (21) Glue scraping unit, pneumatically controlled | ||
| - (32) Spraying unit for cleaning fluids situated before the polishing units | ||
| - (33) LED lighting | ||
| 101 | Performance package 1 tempora 60.12 e-motion (additional options included: 60, 65, 64, 69, 71, 67, 20, 33, 42, 47, 53, 32) | O |
| - (60) Chain feeder with a speed of 12 and 20 m/min and rubber grip pads for maximum grip on the workpiece | ||
| - (65) / (66) Preparation for retrofitting a premelter | ||
| - (64) Pneumatic-mechanical infeed gate, to prevent the premature feeding of the workpiece | ||
| - (69) Corner rounding unit for soft- and post forming pieces for processing edges of between 0.4 and 3.0 mm in thickness and 10–60 mm in height | ||
| - (71) Motor adjustment and positioning of corner-rounding cutters | ||
| - (47) Premillers with replaceable cutters 64 mm in height instead of 49 mm | ||
| - (67) Reverse function of the glue application roller | ||
| - (20) / (21) Glue scraping unit, pneumatically controlled | ||
| - (33) LED lighting | ||
| - (42) Spraying unit for separation solution positioned at the front of the machine (PUR-Glue) | ||
| - (53) Spraying of lubricants | ||
| - (32) Spraying unit for cleaning fluids situated before the polishing units | ||
| 102 | Performance package 2 tempora 60.12 e-motion (additional options included: 60, 65, 64, 68, 47, 67, 20, 33, 42, 53, 32) | O |
| - (60) Chain feeder with a speed of 12 and 20 m/min and rubber grip pads for maximum grip on the workpiece | ||
| - (65) / (66) Preparation for retrofitting a premelter | ||
| - (64) Pneumatic-mechanical infeed gate, to prevent the premature feeding of the workpiece | ||
| - (68) Corner rounding unit with 2 independent motors for soft and postforming workpieces and for the processing of front and rear edges with 0.4-3.0 mm edge thickness and 10-60 mm workpiece height; motorised positioning of the corner rounding unit | ||
| - (47) Premillers with replaceable cutters 64 mm in height instead of 49 mm | ||
| - (67) Reverse function of the glue application roller | ||
| - (20) / (21) Glue scraping unit, pneumatically controlled | ||
| - (33) LED lighting | ||
| - (42) Spraying unit for separation solution positioned at the front of the machine (PUR-Glue) | ||
| - (53) Spraying of lubricants | ||
| - (32) Spraying unit for cleaning fluids situated before the polishing units | ||
| 103 | Complete Package tempora 60.12 e-motion (additional options included: 10, 69, 74, 20, 30, 32) | O |
| - (60) Chain feeder with a speed of 12 and 20 m/min and rubber grip pads for maximum grip on the workpiece | S | |
| - (65) / (66) Preparation for retrofitting a premelter | S | |
| - (64) Pneumatic-mechanical infeed gate, to prevent the premature feeding of the workpiece | S | |
| - (69) Corner rounding unit for soft- and post forming pieces for processing edges of between 0.4 and 3.0 mm in thickness and 10–45 mm in height | ||
| - (74) Grooving unit for horizontal or vertical processing, motorised adjustment X+Y axis, limitation on the corner rounding unit 10-45mm workpiece height (#69 / !68) | ||
| - (71) Motor adjustment and positioning of corner-rounding cutters | S | |
| - (47) Premillers with replaceable cutters 64 mm in height instead of 49 mm | S | |
| - (67) Reverse function of the glue application roller | S | |
| - (20) / (21) Glue scraping unit, pneumatically controlled | ||
| - (33) LED lighting | S | |
| - (42) Spraying unit for separation solution positioned at the front of the machine (PUR-Glue) | S | |
| - (53) Spraying of lubricants | S | |
| - (32) Spraying unit for cleaning fluids situated before the polishing units | ||
| Important Accessories | ||
| 500 | 02.0.202 - distributor for extraction T60.12 | O |
| 502 | 02.0.412 - H/SE-Industrial Dust reinforced D=120mm | O |
| 501 | 02.0.406 - H/SE-Industrial Dust reinforced D=60mm | O |
| 200-102 - Filter unit with water separator and two fine upstream filters with contamination indicators for maintenance unit for wall assembly | O | |
| 200-105 - Additional support frame for edgebanders with a length of 2100 mm. The height is adjustable from 870 to 960 mm | O | |
| 200-106 - Mobile cleaning unit for the glue pot including a temperature regulator initiator for the glue rollers, including a pre-melting function | O | |
| 200-107 - Storage bins for the glue pot, including an air condenser for PUR glue | O | |
| Transport | ||
| 229 | Container packaging | O |
| U-motion classic return system | ||
| Return feeding without rotation function for workpieces; length 300-2,800mm; width 50-1,300mm; thickness 8-60mm; workpiece sizes with 4 sided edge application; min 300x300mm; max 1,300x1,300mm; max weight < 700mm length = 30kg; max weight > 700mm length = 60kg; variable feed speed 7-20 m/min; max. 11 cycles/min; conveyor belt for the return transport; the workpieces as well as the outfeed station (2,000x800mm); 3x400 Volt / 50-60Hz; 6Bar; 10Nl/min | O | |
| U-motion professional return system | ||
| Return feeding with rotation function for workpieces and unloading position for Euro pallets; length 300-2,800mm; width 50-1,300mm; thickness 8-60mm; workpiece sizes with 4 sided edge application; min 300x300mm; max 1,300x1,300mm; max weight < 700mm length = 30kg; max weight > 700mm length = 60kg; variable feed speed 7-20 m/min; max. 11 cycles/min; conveyor belt for the return transport; the workpieces as well as the outfeed station (2,000x800mm); 3x400 Volt / 50-60Hz; 6Bar; 450Nl/min | O | |
| U-motion professional return system options | ||
| additional loading position 1,200mm (max. 1 piece) | O | |
| S | ... | Standard equipment |
| O | ... | Option |
| W | ... | Optional equipment at no extra cost |
| - | ... | Not available |
