Felder lailihvpink FW 950 classic
| Electrical setup |
| 001 |
3x 400 V |
S |
| 004 |
50 Hz |
S |
| 8 |
10.0 HP (7.5 kW) sanding motor for sanding module |
S |
| 10 |
STAR-delta-START |
S |
| |
Ampage meter for monitoring the electrical load on the units |
S |
| |
Automatic sanding-belt brake |
S |
| |
| |
Sanding unit and sanding cushion |
| |
Combination unit CU (contact roller and sanding cushion), hardness of the contact roller C 85° Shore, Digital grain compensation can be chosen from the control panel |
S |
| 300 |
Electro-pneumatic sanding cushion EP |
S |
| |
Sanding width 950 mm |
S |
| |
Sanding height 3–170 mm |
S |
| |
Sanding belt is oscillated electro-pneumatically |
S |
| |
Electronic run-off protection for the sanding belt |
S |
| |
Pneumatic tensioning of the sanding belt |
S |
| |
Sanding belt 970 x 1700 mm (width x length) |
S |
| |
| |
Feeder table |
| |
Electronic height adjustment of the feed table in 0.1 mm incremental steps from the control panel |
S |
| |
Digital display shows the height of the feeder table |
S |
| 16 |
Inverter controlled variable feed speed of 2.5-10 m/min, selected from the control panel |
S |
| |
Mechanical vibration-absorbing rubber pressure rolls |
S |
| |
Hand guard and over-thicknessing protection for the workpiece |
S |
| |
| |
General |
| 86 |
Preparation for min. transport width 800 mm |
O |
| |
Machine packing dimensions in mm (length x width) |
1400 x 1350 x 1900 |
| |
Extraction connector Ø in mm |
1x 120 |
| |
Weight kg (with standard configuration) |
800 |
| |
| |
Important Accessories |
| 85 |
Double-sided roller table extension 200 mm |
O |
| 221 |
Preparation for Container Transport |
O |
| |
S...Standard equipment
O...Option
W...Optional equipment at no extra cost
-...Not available
