Wide-belt grinder Maxx is designed for sanding workpieces made from wood, wood base composite materials, paper and some plastic materials and metals.
| Weight |
kg |
2250-5500 |
| Pressured air consumption |
l/min |
150-200 |
| Machine dimensions (L/W/H) |
mm |
1900-3600 × 1800 2000 × 2100 |
| Desk lifting motor power |
kW |
|
| Diameter of exhaust opening |
mm |
180 |
| Air suction speed |
m/s |
- |
| Voltage / frequency |
V / Hz |
- |
| operating pressure |
bar |
6 |
| Work width |
mm |
1100 1300 |
| Maximum workpiece height |
mm |
3-160 |
| Max. operating width |
mm |
1100-1300 |
| Min. - Max. workpiece height |
mm |
3-160 |
| Feed belt speed |
m/min |
3-12 |
| Grinding belt width |
mm |
1120-1330 |
| Grinding roller diameter |
mm |
240 |
| Grinding belt speed |
m/min |
22 |
| Input of grinding belt motor |
kW |
15 18,5 |
| Input of feeding belt motor |
kW |
1,5 |
| Two-speed feeding belt motor |
kW |
- |
Standard equipment
- operating roller rubber coated D=240 mm, 90 Sh
- grinding belt width 2620 mm
- automatic switching - star / triangle
- frequency converter of feeding belt speed 3 - 12m/min
- ammeter for measuring the grinding unit
- motor current Oscillation control grinding belt by means of optic electric sensor with infrared beam
- solid desk , moving grinding unit
- motorized lift of grinding units
- programmable movement in position
- workpiece height positioner
- mechanical correction of operating height depending on grinding belt grain size
- NC machine control Touchscreen 10,4 "
- electronic correction of height measuring of the outlet workpiece according to the grinding belt grain size
- automatic setting of operating rollers into pre-programmed positions
- rubber coated thrust rollers – 2 pcs on inlet and outlet
- pneumatic disk brake of main motor
- safety pressure switch 3,5 - 4,0 bar
- air pressure regulation for stretching grinding belt 2,5 - 5,5 bar
- noise pollution inspection
- CE electric and safety standard
Optional accessories
- motor 25HP (18,5 kw), 30HP (22 kw), 40 HP (30 kw)
- rubber coated roller Ø 240 mm 30 Sh, 45 Sh, 90 Sh
- steel roller replacing roller rubber coated Ø 240 mm
- frequency converter of the main motor- belt speed 3 - 20m/s
- automatic positioner of workpiece height
- two speed motor for lifting the grinding units
- limiting the maximum workpiece reduction
- thrust bars for grinding short pieces
- pneumatic time blow for cleaning the grinding paper
- pneumatic time blow with nozzle oscillation for cleaning 1 grinding belt
- additional desk - inlet
- additional desk - outlet
- pneumatic base with bounce and thrust
- two position pneumatic base with bounce and thrust
- divided, pneumatically controlled base, bounce and thrust, width of segments 30mm
- divided, electr. Controlled base , width of segments 30 mm + NC machine control Touchscreen 10,4"
- parts cleaning module with orbital blow
- parts cleaning module with rotary brush
- vacuum desk
- air pump
